Tire stitchers are necessary to effectively repair a tire. It is feasible for such an entire patch to cling to the tyre by using a tyre stitcher to ensure that it is compressed into the inner tube of the tyre. Specifications: Dimensions: 2″ x 1/4″

The top three tyre puncture repair techniques by far are:

1. an outside fix made with tire string.
2. an internal fix made using a patch.
3. an internal fix utilising a patch and plug combo.

Another method to repair tire is Sewing the tire and for that we’ll need a good needle to sew the tire. A needle that is large enough to go through a tyre but not so large that it leaves large holes in the tyre is required.

The Standard Tire Repair Equipment

Pliers

It is a hand-hheld device that can be used to pull, chop, or securely grasp anything. Remove any foreign objects that have caused a tyre puncture, such as nails, rocks, or other pointed objects, with pliers.

Tool with a T-handle

There will be two T-handle tools: a rasp tool and a tool for inserting needles. They are employed to clean the hole and insert the plug securely.

The inside of the tyre hole needs to be cleaned using the rasp tool. Just move it up and down into the injured region. Next, place the repair plug in the needle insertion tool’s eye and insert it into the hole in nearly all of the affected areas. Wheel Plugs

These cordage fragments are used to seal off the injured area. You should keep an extra supply of plugs on hand in addition to the ones included with the kit.

The rubber cement

This type of glue is created by combining latex with a solvent, such as toluene, acetone, or heptane. The purpose of the tyre plug is to seal the leaky or punctured area.It creates a reliable yet adaptable relationship between two things.

Tire air pump

Solvents, which help the coatings stick to the rubber tyre, are among the three components of the pressurised fluid combination found in canned tyre inflators. sealants, which cover the hole momentarily. propellants that force the tire-inflating sealant into the container and into the tire. Auto Jack

Sometimes it’s impossible to fix the rupture without removing the tire. A car jack will be required in that situation.

How to patch a punctured tire:

There is no failsafe tire. Even items made by companies with the best bicycle or vehicle tyres might develop punctures. Therefore, a rupture repair kit should always be kept on hand as the first line of defence.

Now, stop and park your car on a level surface in case you come across a leak. Before beginning to repair the puncture, switch the engine off and engage the parking brake. Try to fix the tire while it’s still attached to the car. Take these actions:

1. To remove the alien item that has pierced the tyre, use the pliers.
2. Remove the item and replace it with the spiral probe. To clean and enlarge the leak’s area, slowly circle the spiral probe.
3. Remove one tyre cord from the packet, then place it in the middle of the big needle that is given. Once both sides are level, push the strip through the needle eye.
4. To unclog the puncture, lubricate these spiral probes with the rubberized cement solution and insert them there.
5. Take out the spiral probe, then swiftly affix the needle and cord for repairing tires. Just enough of the cord should be visible outside the rubber after you’ve pushed it inside for a while.
6. At this point, swiftly withdraw the insertion instrument by pulling the handle straight out.
7. Trim the protruding ends of the cord with a blade or knife.Even if some pieces are not completely trimmed, the wheel will nonetheless flatten them.
8. Your car is ready to depart once you re-inflate the punctured tyre.

What purpose does a stitching tool serve in tire repair?

Every vehicle’s puncture repair (patch) is done with a roller stitcher. The roll stitcher is used to forcefully roll over the surface of the patch to remove any potential tiny bubbles between the repair patch and the tyre.The equipment that is meant to mould or bend metallic coating into desired shapes is called a roller set or a rolling tool.

What exactly is an auto tire patch?

The auto tyre rupture patched bearings roller needle tool fits all types of tubes, tyres, and tubeless tyres exceptionally well and without causing any harm.The hole is patched from the inside. If the patch you have now is self-vulcanizing, once you start driving, it will heat up and melt into the tire’s rubber.

Traditional Valve installation tools are Pull Type which means they insert the valve in a rim by pulling it out of the rim hole from inside the rim. Push Type Mechanism involves pushing the valve in the rim hole from outside the rim.

Push type tools are required to safely and securely set the transmitter of TPMS(Tyre Pressure Mounting system) valve along the rim, without damaging it or getting it clashed with the rim.

The traditional Valve Installation Tools hold the valve from its top while the push type tools hold the valve from its bottom end(from the transmitter).

3 Simple “DIY” steps to Install a Valve with Push Type Valve !!!

1)Insert the Valve in the Valve Installation Tool as shown in the picture.

2)Place the valve in the rim hole and tool’s hook over the rim flange as shown in the picture. The hook has a protective & anti slippery plastic covering to avoid rim damage while pressure is applied on it.

3)Apply pressure on the tool handle and push it down. This will in turn push the valve in the rim hole. The castor wheel help in focusing tools pressure on the valve to correctly insert in the hole.

4)Please make sure the valve is inserted correctly with transmitter and the rim having an even gap between them from outside rim and valve stem correctly coming out of the rim from inside the rim.To order your Tubeless TPMS Tyre Valve Installation Tool anywhere worldwide or to enquire about other SARV accessories ( Wheel Balancing Accessories , Tyre Changing accessories, Wheel Alignment Accessories , Tyre Service ,Repair & Valve Tools , Tyre Levers , Puncture Repair Kits etc )  from our complete range, write to us at info@sarveshwari.com or visit our website www.sarveshwari.com

Video

To order your Permanent Nail Hole Repair Kit anywhere worldwide or to enquire about other SARV accessories ( Wheel Balancing Accessories , Tyre Changing accessories, Wheel Alignment Accessories , Tyre Service , Repair & Valve Tools , Tyre Levers , Puncture Repair Kits etc )  from our complete range, write to us at info@sarveshwari.com or visit our website www.sarveshwari.com

• Tyre pastes lubricate the tyres beads and aid in mounting /demounting processes by temporarily softening it
• It is specifically made to make tyre changing operations easy , faster and damage free.
• They are quick drying in mature and hence prevent the rims from slipping of the tyre once the mounting is completed.
• They are universal in nature and do not corrode or erode any kinds of rims.

Sarv offers a variety or tyre brushes to go long with tyre pastes suiting your need.

• For ex Special angle on the tyre brushes helps in easy application of the tyre pasts on/in the beads and rims.

To order your Tyre Pastes & Brushes anywhere worldwide or to enquire about other SARV accessories ( Wheel Balancing Accessories , Tyre Changing accessories, Wheel Alignment Accessories , Tyre Service , Repair & Valve Tools , Tyre Levers , Puncture Repair Kits etc )  from our complete range, write to us at info@sarveshwari.com or visit our website www.sarveshwari.com

• Tyre treads are designed to give good grip on wet roads but this generally decreases as a tyre’s tread pattern wears down.
• Worn out tyres heat up faster and burst eventually.
• Without adequate tread depth the tyre may not be able to perform properly in wet conditions, reducing your safety on the road.
• Tread Depth Gauges are used to measure the tread depth of the tyres and alarm the operator in case of much discrepancy.

Sarv Offers Tread Depth Gauges for different Tyre Segments. Click here to know more about the Tread Depth Gauges for

To order your Tyre Tread Depth Gauges anywhere worldwide or to enquire about other SARV accessories ( Wheel Balancing Accessories , Tyre Changing accessories, Wheel Alignment Accessories , Tyre Service , Repair & Valve Tools , Tyre Levers , Puncture Repair Kits etc )  from our complete range, write to us at info@sarveshwari.com or visit our website www.sarveshwari.com

Valve Core Screw Driver easily removes and fixes the valve core from and in Valve stem.Sarv presents to you the entire range of screw drivers for CARS , COMMERCIAL VEHICLES &  OTR Tyres.

Manufactured in house, they are sturdy and functional and do not damage the valve cores.

To order your Screw Drivers or to enquire about other SARV accessories ( Wheel Balancing Accessories , Tyre Changing accessories, Wheel Alignment Accessories , Tyre Service , Repair & Valve Tools , Tyre Levers , Puncture Repair Kits etc )  from our complete range, write to us at info@sarveshwari.com or visit our website www.sarveshwari.com

Why are motorcycle wheels different?

Dynamic balancing requires 3 inputs: Diameter, Width and Offset. With a standard car balancer the offset measurement is not possible as motorcycle wheel sits in front of the back plate of the wheel balancer. Therefore Motorcycle External clamping kit is fit on the car wheel balancer to aid in the dynamic balancing of the motorcycle tyre.

To order your Motorcycle External Clamping Kit anywhere worldwide or to enquire about other SARV accessories ( Wheel Balancing Accessories , Tyre Changing accessories, Wheel Alignment Accessories , Tyre Service , Repair & Valve Tools , Tyre Levers , Puncture Repair Kits etc )  from our complete range, write to us at info@sarveshwari.com or visit our website www.sarveshwari.com

Sarv Introduces its Valve core screw driver with torque (3300414) for screwing/unscrewing valve cores of expensive TPMS valves for normal bores.

The torque is preset to 0.04N which ensures tightening to a sufficient torque and helps in preventing over torqueing which can damage the core.  If the core is loosely tightened, it may not do its function at all. If a core is tightly secured, it can damage it and can sometimes lead to its breakage. This screw driver by providing the requisite torque for the core, protects the TPMS valves sensor cores. These are light weight, durable, easy to use and provide a firm anti slip grip at the handle.

These can be used for normal cores as well but finds its more importance with TPMS valve sensor cores.

To look at our complete range of screw drivers to open normal , large & extra large bores , please click here.

To order your screwdriver with torque anywhere worldwide or to enquire about other SARV accessories ( Wheel Balancing Accessories , Tyre Changing accessories, Wheel Alignment Accessories , Tyre Service , Repair & Valve Tools , Tyre Levers , Puncture Repair Kits etc )  from our complete range, write to us at info@sarveshwari.com or visit our website www.sarveshwari.com

Timely Wheel Alignment is extremely important to avoid road accidents and unwanted tire wear. A good Alignment Machine helps you correctly detect the variations in the alignment angles of the vehicles such as Total Toe, Caster , Camber , King Pin etc

Like any good alignment machine, you need sturdy & durable accessories to support it in order to get the best possible readings with minimum variation.

Sarv is your STOP! Buy your Wheel Alignment Machine Accessories from us that go with majority of Wheel Alignment Machines around the world and reward your customers with correct wheel alignment readings! 😊

Break Pedal Depressors:

Used for depressing the break pedal of the vehicle in order to keep it sill. This helps a single operator to carry Alignment of the vehicle , as he no longer have to sit in the vehicle to press the pedal!! Click here to see our range and details.

Wheel Clamps & Pins:

Most Important Accessory of the Wheel Alignment Machines. Wheel Clamps are designed to hold the “Targets” on the wheel rims which measure the variations in the alignment of a vehicle with the help of camera attached to the body of the alignment machine. The Pins of the wheel clamps are their point of contact with the rims.

Increasing our range we have recently introduced 5 point clamps which hold the wheel from its tyre side walls rather than the rims.

Click here to see our range and details.

Turn Plates:

Another Most Important Accessory of Wheel Alignment Machines. They are used for easing & frictionless turning of the wheels (LEFT OR RIGHT) to measure the deviation in the degree of turning of the wheel. They provide a smoother surface and better turning readings than keeping the wheel on the ground (sometimes uneven).

Click here to see our rangeand details.

Steering Wheel Holders:

grip the steering wheel firmly in position when setting the toe angle.

To order your wheel Alignment Accessories Kit anywhere worldwide or to enquire about other SARV accessories ( Wheel Balancing Accessories , Tyre Changing accessories, Wheel Alignment Accessories , Tyre Service , Repair & Valve Tools , Tyre Levers , Puncture Repair Kits etc )  from our complete range, write to us at info@sarveshwari.com or visit our website www.sarveshwari.com

Wheel Balancing is required in every wheel that has been on the road. Uneven surface of the roads cause wear & tear of the tyre. This leads to overall unbalance in the wheel. A vehicle with unbalances wheels will experience wobbling and uneven tyre wear. To correct this good wheel balancing machines are used by the operators.

Like any Wheel balancing machines to detect the correct unbalance, good quality wheel balancing accessories should be used to support it.

SARV has been there for years to provide you with the best in class wheel balancing accessories starting with its internationally recognized and famous wheel balancing weight plier.

To know our complete range of wheel balancing accessories click here :

Wheel Balancing Weight Plier/Weight Hammer:

For Securely, Fastening, cutting & loosening of Steel Weights. Click here to see our range and details.

Rim Width Caliper:

Used as an essential accessory of Semi-Automatic Wheel Balancing machines to measure the width of the rim , an important component while calculating the wheel unbalance. Click here to see our range and details.

Wheel Balancing Cones & Wheel Clamping Cups/ Pressure Cups:

Most Important accessory for wheel balancing machines. Cones & Pressure cups help in properly and evenly mounting & holding the centre of the wheel on the wheel balancer shaft. Available in various shapes & sizes , ask for your model now! Click here to see our range and details.

Other Wheel Balancing Accessories :

ADHESIVE WEIGHT ACCESSORIES

Adhesive Weight Cutter:

Cuts the Adhesive weights from its strips up to the required weight. Click here to see our range and details.

Adhesive Weight Remover: 

Removes the Adhesive Weight strip from the rim. Click here to see our range and details.

Adhesive Weight Remover Plier:

Grips the adhesive weights removes it from its strip on the rim. Keep the rim scratch free. Click here to see our range and details.

To order your Wheel Balancing Accessories anywhere worldwide or to enquire about other SARV accessories ( Wheel Balancing Accessories , Tyre Changing accessories, Wheel Alignment Accessories , Tyre Service , Repair & Valve Tools , Tyre Levers , Puncture Repair Kits etc )  from our complete range, write to us at info@sarveshwari.com or visit our website www.sarveshwari.com

Use Sarv’s Temporary Puncture Repair Kit(440007) for repairing punctures on the go while travelling or use it in your shop if you are a mechanic yourself!

A MUST have in every car and passenger car mechanic shop.  Manufactured by Sarveshwari Engineers, India, the tools are sturdy and do not break under pressure applied while inserting them in the tyre injury path. The Puncture seals are of international quality and have a good stickiness to them, this provides temporary repair for a longer duration. Due to their long shelf life, you don’t need to worry about their durability! 

A Guide to Use Sarv’s Puncture Kit:

Fully Insert the Spiral Probe and then remove it to clear the injury path.

Remove 1 puncture repair string from the flap.

Remove the needle from the tyre. String is left behind in the tyre which seals the puncture.

Puncture Repaired!

To order your Puncture Repair Kit anywhere worldwide or to enquire about other SARV accessories ( Wheel Balancing Accessories , Tyre Changing accessories, Wheel Alignment Accessories , Tyre Service , Repair & Valve Tools , Tyre Levers , Puncture Repair Kits etc )  from our complete range, write to us at info@sarveshwari.com or visit our website www.sarveshwari.com

Small in size but an important tire repair tool from SARV can do 4 tyre valve repair actives. Its handy, portable and very useful.

1. Repairs External Valve Stem Threads:-Rethreads or re taps the external corraded threads of the valve stem. It sharpens them to make the screwing of the valve cap easy and firm.

2. Repairs Internal Valve Stem Threads:-Rethreads or re taps the internal corraded threads of the valve stem. It sharpens them to make the screwing of the valve core easy and firm.

3.Acts as a screw driver and removes and installs a valve core.

4.Extract a damaged valve core which can no longer be screwed/unscrewed with the screw driver.

To order your 4 Way Tire Repair Valve Tool anywhere worldwide or to enquire about other SARV accessories ( Wheel Balancing Accessories , Tyre Changing accessories, Wheel Alignment Accessories , Tyre Service , Repair & Valve Tools , Tyre Levers , Puncture Repair Kits etc )  from our complete range, write to us at info@sarveshwari.com or visit our website www.sarveshwari.com